Air Flow: 8,000 CFM @ 2” SP THROUGH 4,000 CFM @ 14″ SP
Standard Housing Instruction: Welded 7, 10, and 12 gauge mild steel constructions, rated for -25 w.g. One 1” NPT sprinkler port with plug is provided in the upper front center of each filter module.
Hopper: Square, ledgeless hopper with 10” bottom flange is made of 12 gauge steel.
Legs: Mild steel support legs designed in compliance with IBC 2006 International Building Code and for Occupancy Category 2, basic wind speed 90 mph, Ground Snow Load 40 PSF, Roof Live Load 20 PSF, Collector Base at Grade. Provides 48” clearance below Hopper Discharge Flange.
Cartridges: (16) MERV-15 cartridges filters, each provided 190 square feet of filter area for a total operating filter area 3,040 feet squared with galvanized steel end caps and expanded metal inner and outer liner. Operating temperature: 180 F maximum.
Inlets/Outlets: Standard
Solenoid Enclosure: NEMA 4
Pressure Gauge: Magnehelic
Hopper Outlet Pack Drum; includes 10” diameter hose, clamps, and a 55-gallon drum cover to provide an airtight seal at the hopper discharge.
Sound Attenuator / Silencer
Full Control Panel
URL Listed
NEMA 12 Enclosure
15 HP Fan Motor Starter
Through Door Disconnect
Start/Stop Buttons
Delta P Plus Cleaning for On or Off Time
REBUILD WILL INCLUDE NEW: FILTER CARTRIDGES, KNOCKDOWN REBUILD KITS, SOLENOID REBUILD KITS, GASKETS, PAINT, MERV-15 FILTERS