Manual Blast Cabinets

Choosing the right blast cabinet can be difficult, especially when trying to balance cost, versatility, and performance. With so many options available, it’s easy to get lost in the details.

Manual blast cabinets come in two main configurations, each designed to address specific challenges:

  • Suction Blast Cabinets: Ideal for applications that require lower production rates, these cabinets use a venturi effect to pull abrasive material into the blast gun, mixing it with compressed air to blast the workpiece. Suction cabinets require lower air volume (cfm) compared to pressure blast cabinets.
  • Pressure Blast Cabinets: Ideal for applications that demand higher production rates, these systems use a pressurized vessel to contain the abrasive which is metered into the compressed air stream through a metering valve. The mixture is then sent under pressure to the nozzle to blast the workpiece. Pressure cabinets require more air volume (cfm) but can clean three to four times faster than suction cabinets.

​

Applications

Blasting is often the recommended means of removing surface contaminants. Air blasting could be the solution. Depending on the complexity of the work-piece, production rates, and the rust, scale or other contamination type.
Contact SurfacePrep today for assistance with determining the best process for removing rust, scale, or other surface contaminants from your products.

Anchor pattern or etch pattern creation is accomplished in a blasting process with a sharp media.
Contact SurfacePrep today for assistance with developing a process that produces the anchor pattern requirements recommended for your coatings.

Abrasive blasting cabinets provide a controlled environment for achieving uniform surface textures on metal, plastic, or composite parts. This process enhances adhesion for coatings and improves the overall appearance and performance of finished components.

Used in manufacturing and restoration, abrasive blasting removes surface imperfections and prepares parts for painting, bonding, or further processing. It ensures consistent finishes across batches, critical for quality control.

Contact us today to speak to a specialist about your specific application.

Blasting cabinets efficiently strip away old paint, rust, and other coatings without damaging the underlying material. This makes them ideal for refurbishing parts or preparing surfaces for recoating.

Contact us today to speak to a specialist about your specific application.

Whether your cleaning requires a simple dunk tank parts washer or a complex wet blast system, SurfacePrep is here to assist.
Contact SurfacePrep today for more information and assistance with parts cleaning.

Blast Cabinet Types

Industrial dry blast cabinets are high-performance systems designed for heavy-duty surface preparation, cleaning, and finishing in manufacturing and maintenance environments. They use compressed air to propel abrasive media, delivering consistent results across a wide range of materials and part sizes.

Built for durability and efficiency, these cabinets support high-throughput operations with features like dust collection, media recycling, and ergonomic access. They are ideal for industries requiring precision and repeatability, such as aerospace, automotive, and metal fabrication.

Contact us today to speak to a specialist about your specific application.

Sodium bicarbonate blast cabinets are designed for gentle yet effective cleaning, using a soft, non-destructive media ideal for delicate surfaces like aluminum, plastics, and composites. They excel at removing contaminants, coatings, and corrosion without etching or damaging the substrate.

These systems are widely used in industries such as automotive restoration, food processing, and aerospace maintenance where surface integrity is critical. The media is water-soluble and environmentally friendly, making cleanup simple and safe.

Contact us today to speak to a specialist about your specific application.

Wet blast cabinets combine water and abrasive media to reduce dust and heat, making them ideal for delicate parts or environments with strict cleanliness requirements. This method produces a smooth, satin-like finish while minimizing surface damage.

Contact us today to speak to a specialist about your specific application.

Micro-blasting cabinets are precision systems designed for detailed surface treatment of small or delicate components using fine abrasive media. They are commonly used for deburring, etching, or cleaning intricate parts in electronics, medical devices, and aerospace applications.

These cabinets offer pinpoint control over blast pressure and media flow, making them ideal for tasks requiring accuracy without damaging sensitive surfaces. Their compact design and fine nozzles allow operators to target specific areas with minimal media waste.

Contact us today to speak to a specialist about your specific application.

Blast Cabinet Accessories

SurfacePrep offers abrasive reclaim systems that recover and recycle blast media to improve efficiency and reduce costs, using either pneumatic or mechanical recovery based on media type. Options range from simple sweep-in models to full floor recovery systems, accommodating various operational scales.

Contact our specialists today for your abrasive reclaim needs!

SurfacePrep offers dust collection systems designed for abrasive blasting operations, featuring high-efficiency filters and air-pulse cleaning to maintain clean air and optimal performance. Options range from compact units for small jobs to high-capacity systems for larger industrial applications.

Contact our specialists today to meet your dust collection needs!

Vertical lift doors provide smooth, space-saving access to the blast cabinet, making them ideal for tight work areas or production lines.

They enhance operator safety and efficiency by allowing quick loading and unloading without interfering with surrounding equipment.  They are well suited for laoding track and turntable applications saving time and space.

Contact us today to speak to a specialist about your specific application.

Material handling accessories such as carts, conveyors, and hoists streamline the movement of heavy or bulky parts into and out of the blast cabinet.

These tools reduce manual lifting, improve workflow, and support higher throughput in industrial blasting operations.

Contact us today to speak to a specialist about your specific application.

Door-mounted tumble baskets automate the cleaning of small parts by gently rotating them during blasting for even coverage.

They are ideal for batch processing of fasteners, fittings, and other small components, saving time and labor while ensuring consistent results.

Contact us today to speak to a specialist about your specific application.

Turntables allow operators to easily rotate large or heavy parts inside the cabinet for complete surface coverage without repositioning.

Available in manual or powered versions, they improve ergonomics and blasting precision, especially for cylindrical or multi-sided components.

Contact us today to speak to a specialist about your specific application.

Ready To Buy?  Start Shopping Now!

SurfacePrep partners with trusted OEM Manufacturers to supply a full range of air blast cabinet systems. Let us help you overcome the confusion and find the right solution for your blasting requirements.

Some of our OEM Partners Include:

Empire Abrasive Equipment

Why Choose Our Air Blast Equipment?

Quality

Built to last, reducing downtime and maintenance costs

Support

Comprehensive customer support from installation to maintenance

Efficiency

Designed to maximize productivity, saving you time and effort

Featured Products

Pro Finish Suction Blast Cabinet

Pulsar Plus Pressure Blast Cabinet

65 Double Blast Cabinet

Pressure or Suction Cabinet Gloves, Pair or Left Hand

Have a Question? Connect with one of our Experts Today!

Industry Articles

The Importance of Proper Media Flow in an Abrasive Media Blast Cabinet

June 21st, 2024|Comments Off on The Importance of Proper Media Flow in an Abrasive Media Blast Cabinet

The right size of steel shot or grit blast media can make all the difference in a project's outcome. By understanding the application requirements and keeping in mind the equipment considerations, optimal results can be ensured.

Selecting The Proper Abrasive Blast Media

August 17th, 2023|Comments Off on Selecting The Proper Abrasive Blast Media

Choosing the right abrasive blast media is essential for achieving the desired finish on a variety of surface materials. The wrong choice can result in an unsatisfactory finish, wasted materials, and potential damage to the surface. As a leading supplier in the industry, SurfacePrep understands the importance of making the right choice. Here’s a guide to help you make an informed decision for your surface finishing application with commonly used abrasives.