(888) 873-1066
Loading...

Radiusing

Radiusing is the creation of a radius on the edge of a work-piece. A radiused edge may be desired if a part has a sharp edge.

Mass finishing processes are commonly used for radiusing. A slight edge break, or very light radius, could be achieved in a vibratory bowl or a simple tumble barrel. If a significant, measurable radius is required, a mass finishing system using high energy equipment, such as centrifugal discs or centrifugal barrels, may be the best choice.

Creating a consistent radius on a part can be a challenge. Contact SurfacePrep for assistance with your radiusing process.

Vibratory Finishing Application by SurfacePrep
2021-10-12T16:41:40-05:00